Budding Enthusiast
  • Content Count

  • Joined

  • Last visited

About mrnobody

  • Rank
    Settling In Well
  • Birthday 04/01/1970

Profile Information

  • First Name
  • Gender*
  • Ford Model
    mondeo tdci 2.0
  • Ford Year
  • UK/Ireland Location

Recent Profile Visitors

2,283 profile views
  1. you CAN reset the mileage back on the convrse+ (and all fords) message me and i will send you the info
  3. hi

    i just got a 2007 mondeo diesel titanium  

    my ford convers+ num rom target is 0803 

    can you point me in the correct place to download the latest version that works on my car 

    and how to install



  4. Had the same problem with 2.0 idci in traffic it was the egr sticking open,Just cleaned it out or you could fit a blank plate.
  5. Best to remove the top part of the inlet manifold to get at the spark plugs at the back,its a hard job to do with it in place.
  6. only seen for are better off geting the update and the mods in one go.Takes about 30-40mins to do.Email alex ( ) for the updates.He will give you all the support you need.
  7. also have a look here
  8. The new software is 1412 or it was in march when i did mine.Had no problems with it.You need something like this to do the update. Sorry dont know how you will go on with a aftermarket stereo.
  9. Did mine works well the update with Park Assist it includes: - park assist displaying - PTC heater displaying - marker and front light are separated - locked door alert messages (messages only, doors still are displays on the car image) - modified turn off logic of MHU (mediaheadunit) on ignition off and driver door open only - clock in standby mode also available - digital speed with displaying controlled by menu - extended colour theme menu (6 items for now) - digital engine temperature and voltage (on main interface and standby mode) - TPMS patch (for non-factory installed sensors without replacement a BCMii module and without installation of the wheel antennas. - custom personal standby logo fw update to lastest (1412) change the km/miles To upload firmware you should have USB modified Elm327.t,
  10. Check the current software by holding in Ok on the steering wheel as you turn the car on and yes the coolant display is in one of the menus on the old software (1218)the new software is 1412. Email alex ( ) for updates he has done a lot of work on the convers+ and has put the vids on youtube
  11. yes original clutch,Had a air mass sensor at 135k,alternator at 150k apart from service parts and brakes it just run
  12. Had over 200k on my 2005 2.0 tdci with no probs.Its still on the road now doing pizza delivery
  13. The mk3 MONDEO was from 2001-2007 ish and yes the steering wheel will fit but the buttons may not work.
  14. odd that there is no weird noises,I would start with the clutch maybe its fell to bits or stuck.
  15. The oil is 75W-90 BO fully synthetic 2 litres