• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About chrisnevitt

  • Rank

Contact Methods

  • First Name

Profile Information

  • Gender*
  • Ford Model
  • Ford Year
  • UK/Ireland Location
  1. Ford Fiesta Mk5 Heaters Stuck On Hot Please Help

    Thanks a lot. my dad is an electrician, he will have that equipment. If there is no reading, is there a way for me to by-pass the old wiring and put new wiring in, going to the control panel and the HCV.There are loads of wires going into the control panel, which two would it be? Thanks for replying :-)
  2. Hi, I bought my 2000 reg ford fiesta 4 days ago now. The heaters are stuck on hot. I have replaced the heating control valve and i got a replacement control panel thats in the car, that you use to control the heating system. I replaced them both today and i still have the same problem. I have also cleaned the contacts up on the plugs, incase anything had got inside them. i dont have air conditioning. Its a simple hot/cold system Also the previous owner had decided to cut the wire to the heater control valve (hcv) and connect the power source up to the battery, this made the blowers cold ( i assume they did this so they didnt bake). I had taken it to my mechanic and he said it may have caused a fire as the hcv would of had two much power going to it. He connected back up to the original wires, and this made the blowers blow hot. He said either part would need replacing so i replaced both. those being the hcv and the control pannel. PLEASE HELP :-(
  3. Welcome to the Ford forums chrisnevitt :)