Budding Enthusiast
  • Content Count

  • Joined

  • Last visited

About Tiggie

  • Rank
    Settling In Well
  • Birthday 08/18/1984

Profile Information

  • First Name
  • Gender*
  • Ford Model
    Focus mk2.5
  • Ford Year
  • UK/Ireland Location
  • Interests
    General Automotive
    Road Trips
    Food & Drink
    Computers & Electronics
    Arts & Crafts

Recent Profile Visitors

1,132 profile views
  1. I got it working internet explorer wouldn't let me download the pcm files had to open chrome, then I could see three links, found my cars serial number download installed to car, kept putting vid lock on dog! Eventually I re read it and put no I could then switch and save to gem if anyone has the vid lock memory thing I can help!
  2. So I get this to what am I doing wrong
  3. Hi guys so I've been trying this on and off for the last year, so I've got the steering wheel with the curse control, it works if you test the buttons with the beep, my car is a mk2.5 1.6 auto i have a good elm cable and am using uptodate software i can activate in the gem but when I go to the pcm it comes up with this error what am I doing wrong
  4. Oldlen just to let you know I have a working cable in Bristol if anyone wants to use it. I have a 1.6 auto (mk2.5) I've put a cmax steering wheel with cruse control on and all wired up beeping so I know the buttons work. Never got cc working I think I'm unlucky with my pcm is the wrong fuse box never had it working I have even went to ford had my fuse box updated and tryed then no
  5. Oh so the drums are ment to Just fit, not be at the slackest point?
  6. Okay so right, about 6 months ago a friend of mine did rear shoes on my car as they made a noise, brakes worked perfectly but the handbrake was sloppy, I adjusted it down and it went down a long way. SO NOW Today i got round to looking at the problem whats wrong? I took off the drum there was a lot of dust, everything looked correct no springs off etc all as it should be. so i clean the dust up and i Put the Adjusters about 95% in back to the start so the thread wasn't showing i get in the car thinking id have to slacken the hand brake, and i pump the brakes, the handbrake cable is way to long or i messed something up. if i tighten the cable, its a long way im guessing 2/3 cm down and it either is tight as hell or dose not work AM i missing something or has the cable stretched? is there a way to tighten this up? or should i take it apart again and do something different, the adjustment isn't like whats on line turoral its this one http://www.fordpartsuk.com/images_orig/1522225/1.jpg MY car is a 2008 2.5 with 36k on it, i had the rear shoes done because one of the pads came off the metal inside
  7. Hi Tom Please dont go to the dealers, I have been there my self and they update the car £80+ and then say its not in the Pcm And its not! the only thing i think you can do is get a new Fuse box (pcm modual) and change it for one that sports cc :( i will do this one day but ive not seen one online for the 1.6 petrol as yet with cc
  8. Hi just a question is any gem module work with any car if all the info is copped to the new one ?
  9. I think it's a closed connection an was hopping that's why my cc wouldn't work I'm going to get a gem out of a tdci and re program and see if that makes my cc work
  10. So would a different gem modual work if it was the right one?
  11. Yes rich nothing happening what so ever is it case it's an auto?
  12. Hi need help trying to set cruse control Ford focus 2008 I have a working lead and wire and software When I go to the PCM It shows blank is that normal?