Budding Enthusiast
  • Content Count

  • Joined

  • Last visited

Everything posted by Tiggie

  1. I got it working internet explorer wouldn't let me download the pcm files had to open chrome, then I could see three links, found my cars serial number download installed to car, kept putting vid lock on dog! Eventually I re read it and put no I could then switch and save to gem if anyone has the vid lock memory thing I can help!
  2. So I get this to what am I doing wrong
  3. Hi guys so I've been trying this on and off for the last year, so I've got the steering wheel with the curse control, it works if you test the buttons with the beep, my car is a mk2.5 1.6 auto i have a good elm cable and am using uptodate software i can activate in the gem but when I go to the pcm it comes up with this error what am I doing wrong
  4. Oldlen just to let you know I have a working cable in Bristol if anyone wants to use it. I have a 1.6 auto (mk2.5) I've put a cmax steering wheel with cruse control on and all wired up beeping so I know the buttons work. Never got cc working I think I'm unlucky with my pcm is the wrong fuse box never had it working I have even went to ford had my fuse box updated and tryed then no
  5. Oh so the drums are ment to Just fit, not be at the slackest point?
  6. Okay so right, about 6 months ago a friend of mine did rear shoes on my car as they made a noise, brakes worked perfectly but the handbrake was sloppy, I adjusted it down and it went down a long way. SO NOW Today i got round to looking at the problem whats wrong? I took off the drum there was a lot of dust, everything looked correct no springs off etc all as it should be. so i clean the dust up and i Put the Adjusters about 95% in back to the start so the thread wasn't showing i get in the car thinking id have to slacken the hand brake, and i pump the brakes, the handbrake cable is way to long or i messed something up. if i tighten the cable, its a long way im guessing 2/3 cm down and it either is tight as hell or dose not work AM i missing something or has the cable stretched? is there a way to tighten this up? or should i take it apart again and do something different, the adjustment isn't like whats on line turoral its this one http://www.fordpartsuk.com/images_orig/1522225/1.jpg MY car is a 2008 2.5 with 36k on it, i had the rear shoes done because one of the pads came off the metal inside
  7. Hi Tom Please dont go to the dealers, I have been there my self and they update the car £80+ and then say its not in the Pcm And its not! the only thing i think you can do is get a new Fuse box (pcm modual) and change it for one that sports cc :( i will do this one day but ive not seen one online for the 1.6 petrol as yet with cc
  8. Hi just a question is any gem module work with any car if all the info is copped to the new one ?
  9. I think it's a closed connection an was hopping that's why my cc wouldn't work I'm going to get a gem out of a tdci and re program and see if that makes my cc work
  10. So would a different gem modual work if it was the right one?
  11. Yes rich nothing happening what so ever is it case it's an auto?
  12. Hi need help trying to set cruse control Ford focus 2008 I have a working lead and wire and software When I go to the PCM It shows blank is that normal?
  13. Okay so I got the wire through today I've tried and I've been and enabled everything I need to system menu but nothing is happening when I hit cc no dash light and not keeping speed, I've found the clutch wire and wired them as a closed connection any suggestions I've missed?
  14. Hi getting cable in post today have downloaded the software and am ready to go Can some one explane How to back up the software on the ecu And how to make the changes and set them Any advice would be welcome Thank you
  15. Okay so i have the software working now on my lilttle laptop, When i get the wire * any day now* What do i need to do with the software, can you expand how i use it a little more? i can open the program as is but dont understand what i need to do, I guess Guess i need to copy the configuration on to my laptop how do i do that? and then tick the boxes i want ( can only see stuff in offline mode) then in gem i tick curse control and just apply? any help will be brillent expecting wire tomorw,
  16. No idea I wasn't allowed to see ill have to use that software you said The program doesn't open on my pc though
  17. Okay 89 pounds lighter no luck guy recons there are no configure things to add it after updating the car :( home brew kits on order anyway
  18. At ford now been told option isn't in the gem I've asked them to update any modals they can to see if it will show up, if not looks like the end of the road & £89 bill
  19. Not good with wires, it wasnt a bad price, the software seems to be in english, Would you all like it uploaded? this is the screen shots of the software http://s72.photobucket.com/albums/i200/boylin/?action=view&current=9e0f64ff.jpg#!oZZ34QQcurrentZZhttp%3A%2F%2Fs72.photobucket.com%2Falbums%2Fi200%2Fboylin%2F%3Faction%3Dview%26current%3D824adc88.png and http://s72.photobucket.com/albums/i200/boylin/?action=view&current=9e0f64ff.jpg#!oZZ35QQcurrentZZhttp%3A%2F%2Fs72.photobucket.com%2Falbums%2Fi200%2Fboylin%2F%3Faction%3Dview%26current%3Dfbbf2b93.png
  20. Okay new News Today i bought this http://www.ebay.co.uk/itm/230850332682?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 its a tool thats been modified and comes with software any thoughts,? im still booked in for monday at ford, shall still go but may of been a waste of money...