• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


fzr400exup

Budding Enthusiast
  • Content count

    4
  • Joined

  • Last visited

About fzr400exup

  • Rank
    Newbie

Contact Methods

  • First Name
    Jon

Profile Information

  • Ford Model
    Anglia 105e
  • Ford Year
    1962
  • UK/Ireland Location
    Hertfordshire
  1. Hi Guys, I hoping someone can help, I have a silvertop Zetec from a mondeo, which is nearly fitted in my anglia, i have the loom which i cut from the mondeo which should go back in, i have the Fiesta EFI inlet manifold to go on with this loom, my question is, do i use the loom that i have or buy an after market one that will be simple to wire in, along with ECU i.e. megasquirt, i do however want to keep the fiesta/mondeo injection system, i dont want to take the route of throttle bodies. Unless someone thinks this would also be better and add an aftermaket ECU? or if there is a thread for this, please could someone add it on to this Thanks Jon
  2. 20 i sierra air flow meter wiring

    Thanks for the replym I have the Haynes manual, which gives me the colours, but it doesnt tell me which colour goes to which pin, so if you looked at your Capri this would be very helpful thanks Jon
  3. Hi Guys, just joined today and hoping someone can help, i have a mk1 escort im putting a 20i pinto sierra engine into, im nearly there, but the loom has been cut to the air flow meter, i have got a new connector from another ford, (colours are different) but im unsure which wire goes where on the 5 pin plug, it uses 4 wires, is anyone able to help by looking at thiers if they have one thanks Jon
  4. 20i sierra air flow meter wiring

    Hi Guys, just joined today and hoping someone can help, i have a mk1 escort im putting a 20i pinto sierra engine into, im nearly there, but the loom has been cut to the air flow meter, i have got a new connector from another ford, but im unsure which wire goes where on the 5 pin plug, it uses 4 wires, is anyone able to help by looking at thiers if they have one thanks Jon