• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


Members via FB
  • Content count

  • Joined

  • Last visited

About Whapter7171

  • Rank

Contact Methods

  • First Name

Profile Information

  • Ford Model
    Mondeo 1.8 TDCi Ghia
  • Ford Year
  • UK/Ireland Location
  1. Hey all The problem: Today after starting the car after work, the EML came on (amber), car would now rev higher than 1500 rpm and sounded like it was running on 2-3 cylinders. I have had this problem before a few times, all I have had to do is turn off the car and wait a short time and fire it up again, problem then goes away (for a while) Today however, the problem seems to be really bad, it took me 3 attempts to drive about 22 miles. That is the bizarre point, I can inbetween the EML being on, drive quite normal. The car will occasionally jump, the best way I can explain is when a petrol car would misfire and there is a hesitation. Sometimes this happens on acceleration or deceleration. Also now noticed that the traction control light is also on, however now the EML is red no longer amber I spent £30 and called a mobile diagnostic technician. Found the following error codes: P1204 - Injection circuit open/short circuit cylinder 4General failure information - no sub type informationU0405 - Invalid data received from speed control moduleGeneral failure information - no sub type information U0401 - Invalid data received from engine control module/powertrain control moduleAlgorithm based failure - event information B112B - Steering wheel moduleGeneral failure information - mechanical failureU0010 - Medium speed CAN communication busGeneral failure information - no sub type informationU0199 - Lost communication with door control module AGeneral failure information - no sub type informationU0200 - Lost communication with door control module BGeneral failure information - no sub type information So he has cleared all the codes for me and suggested I get the P1204 injector issue sorted, may need a new injector and coding or a refurb and coding. Also said I had a networking issue going on somewhere, he suggested I take it to Ford direct as networking issues can be really difficult to troubleshoot. Any ideas what an injector for this car would cost new/refurbed (if possible) and an injector reocde?
  2. Welcome to the Ford forums Whapter7171 :)

    If you get stuck on how to post a question on the forums or trying to message a member then check out our video guides to help you get started!