• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


New Member
  • Content count

  • Joined

  • Last visited

About Techie

  • Rank

Profile Information

  • Ford Model
    Fiesta mk6 1.6 Ghia
  1. Fiesta Mk6 water pump drive belt

    Hi Andy, Just seen your note as I am new to the site. The drive belts on mk 6 Fiestas are 'elastic' ie they have no adjustment built in apart from some give in the belt itself. The fitting of these belts requires the use of several plastic tools (which are supplied as part of the kit with a genuine Ford belt). There is a set procedure for fitting the belt and if this is not followed to the letter the new belt is likely to fail. The process involves rotating the engine in the normal direction of travel whilst using the plastic tools to guide the belt onto the pulleys. No doubt a hasty emchanic may dispense with this method and just lever it in place. The risk is that it may place strain on the waterpump bearings in the process and cause failure of the waterpump - usually sounds like a rumble from that side of the engine. In which case you have to start all over - new waterpump etc.