• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About prmini

  • Rank

Contact Methods

  • First Name

Profile Information

  • Ford Model
    Fiesta Ecoboost 125hp
  • Ford Year
  • UK/Ireland Location
  1. Fiesta Ecoboost 125hp P006A

    Thanks guys , hopefully this benefits another member with there fault finding at some point.!
  2. Fiesta Ecoboost 125hp P006A

    swapped it with the piece from the other fiesta and its solved the issue. so once the stainless one arrives its problem solved.
  3. Fiesta Ecoboost 125hp P006A

    cheers for the heads up. ill get one ordered up today.
  4. Fiesta Ecoboost 125hp P006A

    Part number is 1868114 and its only sold with the lower intercooler hose. €101 plus vat from ford. there are stainless steel ones available to ebay for £50 ish.
  5. Fiesta Ecoboost 125hp P006A

    So today i said id tackle this job. Removed the turbo recirc valve (looked fine) Removed all intake pipes and they are were fine Removed and inspected the intercooler (fine) Just as i was about to give up hope and book it into ford i found this (see attached) Its the hard plastic pipe that comes out of the turbo and has a 90 degree bend. I assume this is the issue, im waiting for the wife to get home to swap the parts over.
  6. Fiesta Ecoboost 125hp P006A

    perfect thanks, im off on tuesday so ill give it a go and report back.
  7. Fiesta Ecoboost 125hp P006A

    Thanks, Ian ill give that a go as well. Do you know if the 110hp and 125hp recirc valves are interchangeable? Paul
  8. Fiesta Ecoboost 125hp P006A

    Hi Thanks for your replies. Car has had the factory intake system from new. I've swapped both the maf and map between the 2 ecoboost fiestas we have (same part numbers ) and had no luck. Hope it's not the ecu, I think I'm going to check the integrity of all the vacuum and boost hoses next
  9. Hi All I have a fiesta ecoboost 125hp giving the fault code P006A "MAP- Mass or volume air flow correlation" (using forscan) Attached a pdf showing the log Car is down on power and after a couple of minutes of driving the spanner will appear and i can read the above fault code with forscan from the PCM. Luckily we have 2 fiestas with the same engine in the household so i swapped the Maf & map on both cars and the problem still persists. Ive checked the intercooler hoses and they all seem tight. any ideas would be appreciated Untitled.pdf