I have removed my rear bumper panel today and left it in the body shop to get the Zetec S rear skirt painted and fitted to it,
i had to remove it as i need the car to travel to work so in a bid to continue to be 100% road legal i made up some fog light and reverse light housings,
using some PVC electrical tape, some cable ties and two 2ltr CocaCola bottles.
first i removed the bumper,
then i cut the bottle in half, just below the label,
then cut a hole from the bottom centre of the bottle, just enough to allow the bulb to stick through,
once the bulb was through i held it in position with some electrical PVC tape and also around the side of the bottle to ensure all of the light is expelled only from the rear of the unit.
followed by cutting two slits in the top for the cable tie to pass through and grip to the chassie.
and here are the results
Im now sitting by the letter box,
awaiting my Blue Peter Badge for this one http://www.fordownersclub.com/forums/public/style_emoticons/#EMO_DIR#/laugh.png
Posting in General Chat thread. 11/11/2017it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.