1.6 Zetec Se Engine Rebuild?

[oldbury863]

Hi, I have read odd bits & pieces where it has been stated that these engines (the black-top all alloy ones)cannot be rebuilt. Can anyone confirm if this is definitely the case? My focus has only covered 73k, but I can tell that the engine has developed a faint knock when accelerating that wasnt present when it was younger. I wondered if new big end shells could be fitted to it now rather than wait until it gets really bad & throw an otherwise good engine away? The engine doesnt burn oil, so is otherwise ok. Anyone got any definitive answers please. . . ?

[artscot79]

Hi, I have read odd bits & pieces where it has been stated that these engines (the black-top all alloy ones)cannot be rebuilt. Can anyone confirm if this is definitely the case? My focus has only covered 73k, but I can tell that the engine has developed a faint knock when accelerating that wasnt present when it was younger. I wondered if new big end shells could be fitted to it now rather than wait until it gets really bad & throw an otherwise good engine away? The engine doesnt burn oil, so is otherwise ok. Anyone got any definitive answers please. . . ?

well brton power rebuild these engines so ide say they can be rebuilt it is basically a yamaha derived engine same as the duratec though ide have this knock proffesionally diagnosed before you go ripping the innards out it may not be what you think or involve as much work