Hi all. 

Ive ordered new front wishbones, drop links and track rod ends for my 2007 c max. The last mot had an advisory of front suspension bushes going, so thought id crack a nut with a sledge hammer and do the lot. 

Anywau, this will be my first time doing anything with suspension, and my question is this. 

Should i use locktite on all the bolts or just torque it to spec? Will i need to retorgue them again in a few weeks as ive read online or is that a myth. 

Any help would be fab. 

Tom.

If you get them replaced at a garage they never ask you to come back and re-torque , so just torque them to the necessary torque setting  And that will be okay , bearing in mind that as you have messed with the suspension it will be an idea to get the tracking done 

Ah yeah. Thats a good point about the garage. Thank you. 

Yeah. I'm planning on going to a place that does computet tracking and getting it done properly.