ive got a 2006 1,6 focus and im looking for a good exhaust trim, how hard would it be to cut the rear bumper for it, thanks

Why on earth would you want to cut your bumper??

Here's what I bought, just remember, to pass an MOT, you need to cut out the grill because it won't allow the probe to see your emissions!

so it can be seen, my exhaust doesnt show unless you look under the car

5 minutes ago, steplce74 said:

so it can be seen, my exhaust doesnt show unless you look under the car

Mine couldn't be seen either till I stuck a bl**dy big chrome bit of metal on it 🤣

You could just use a hacksaw and cut it short then sand it to the right shape. 

2 minutes ago, F0CUE said:

You could just use a hacksaw and cut it short then sand it to the right shape. 

OK buddy, you have lost me. Cut what short? Sand what to the right shape? 😁

Cut it smaller than the actual size then sand it to the correct shape/size so it looks normal. 

7 minutes ago, F0CUE said:

Cut it smaller than the actual size then sand it to the correct shape/size so it looks normal. 

Maybe it's the way I'm reading it LOL Cut 'what' smaller than the actual size? Then sand 'what' so it looks normal? The OP is looking to fit an exhaust trim, the trim shown specifically fits a 'curved down' exhaust as fitted to the Mk2... I know I'm missing something, I'll get my coat 🤣

43 minutes ago, StephenFord said:

Maybe it's the way I'm reading it LOL Cut 'what' smaller than the actual size? Then sand 'what' so it looks normal? The OP is looking to fit an exhaust trim, the trim shown specifically fits a 'curved down' exhaust as fitted to the Mk2... I know I'm missing something, I'll get my coat 🤣

I'm explaining how to cut his rear bumper like he asked. Your trim fits a turn down exhaust. If he was to fit a straight one and cut off the curve he would need to trim the bumper its as simple as that. 

ideally id like a performance exhaust but they seem to be expensive