George alcock Posted August 21 Share Posted August 21 Purchased a ford mondeo on a 2009 titanium x 2.0 diesel a fuew months back , just changed rear breaks and front and starter and battery , just passed mot and then the day after it cut out while driving took a fuew attempts to start and then got it back home , half hour later it refused to start , so I believed it was fuel related so I changed the fuel filter and then had it plugged in saying it needed a new fuel pressure regulator so changed that started and run for over a hour on tickover as soon as I put my foot on acceleration over 3krpm just cut out and won't restart , all were getting on the scanner is fault p0090-00 any advice please would be great full I'm coming to the point weather to break it I have bled all air out of the system Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted August 21 Share Posted August 21 Check the wiring to the FPR. Quote Link to comment Share on other sites More sharing options...
George alcock Posted September 12 Author Share Posted September 12 Got a friend round checked the wiring to the fpr and all fine going to get it to a really good ford mechanic this week so hopefully he narrows it down as I just don't have the time to keep wasting cash and time so will update this week Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.