I'm trying to find a bi-directional rear ABS sensor part no H1BC-2C190-BD

looked on ebay and a few sellers said the part doesn't exist however i have a photo of the part with part number printed on it.

Im not sure if because i have a UK MK8 Fiesta the part number i have is not for it but really struggling.

Anyone help out with a couple of have an alternative UK part number?

Photo of part attached.

1 hour ago, a7mag3ddon said:

H1BC-2C190-BD

Only used on a few Fiesta's with automatic parking.

Ford finis code 2148278

Try here:

https://www.bildelsbasen.se/en-se/OEM/2148278

OR

https://www.autoparts-24.com/search/1/?q=2148278+&type=oemcode

OR

https://www.autodoc.co.uk/car-parts/oem/2148278?search=OEN+2148278&_gl=1*zcfsjh*_up*MQ..*_gs*MQ..&gclid=Cj0KCQjwjo7DBhCrARIsACWauSmEG7j_wcbOBs3-DZCu2Ka5S-0O9o35lX15IVuRaD9DfAmWzk4IBn0aAmNfEALw_wcB

I've fitted the camera today ready and tried to calibrate it in Forscan, let it idle for 60 seconds then drove until bar reached 100% but it never finishes the procedure and when I press stop in forscan then engine off and back on again it still says camera malfunction. Am I supposed to drive until the procedure stops itself ?

Thanks for the sensor links, can't get them in UK and autodoc is out of stock, would this work?

SENSOR ASY – BRAKE ANTI LOCK (LOW SPEED SAFETY SYSTEM) 2102699, ENGINEERING NUMBER AY11-2C190-BC

 

 

Still looking for this sensor if anyone can help, spoke to bildesbasen said they could post, paid, 2 weeks later theyve just cancelled the order on me 😞

Still trying to find an alternative for this sensor they are like rocking horse ***** and ford says because its not fitted to my model ( using the reg ) they wont tell me or sell me anything!

Just the way my mind works - have you checked what is on the other side?

Has to be a bidirectional ABS wheel speed sensor to retro fit pre collision braking I'm afraid. My car was never fitted with them.

I hate people on the internet who (instead of helping) tell someone NOT to do the thing they are trying to do...

...but don't do it.  I have to drive a vehicle with some clever (factory) anti-collision system, and it's BAD to the level of being dangerous.

Really..... don't do it.  (sorry)

58 minutes ago, a7mag3ddon said:

Has to be a bidirectional ABS wheel speed sensor to retro fit pre collision braking I'm afraid. My car was never fitted with them.

You may be able to find the Reg Number of a car for sale through Autotrader or similar that has what you need fitted from the factory and use that Reg Number to get the part from Ford.

4 hours ago, orangecurry said:

I hate people on the internet who (instead of helping) tell someone NOT to do the thing they are trying to do...

...but don't do it.  I have to drive a vehicle with some clever (factory) anti-collision system, and it's BAD to the level of being dangerous.

Really..... don't do it.  (sorry)

I can turn it off if it becomes annoying, I have to say having enabled the pre collision detection already it doesn't come on that often (the warning on the dash and loud noise)

4 hours ago, Tizer said:

You may be able to find the Reg Number of a car for sale through Autotrader or similar that has what you need fitted from the factory and use that Reg Number to get the part from Ford.

For example this 2022 Fiesta with automatic parking

Reg: LK22 MBY    VIN: WF0JXXGAHJNY09517

3.42/1.96/1.28/0.94/0.76/0.63
reverse parking aid
front parking aid
advanced automated park system

Thanks I'll go back to ford with those details and see what they say. Don't know why they are so hard to get really. It's not an old car. I tried it before with a. Reg no from a car sales site but they said no. Even sent them the photo saying this is what I want.. code on the physical cable 😂

Ford said they don't have that part number  2148278

What I've had to do is have it sent to Poland via LAGA and then someone's going to pick it up in 2 weeks when passing through on holiday 😂 things we do for modding...

If I don't get them this time then it's God's way of saying don't bother as the family friend is a polish ordained priest who's getting them for me 😂 😇

 

After fitting the Camera forever ago! Today I finally fitted the correct suggested ABS sensors, a few clicks and configs later all DTC cleared.

Originally set to level 1 Gen 1 and brakes didn't kick in when the dashboard warning comes up.

Changed to Level 2 Gen 2 now, will re-test tomorrow. ( Last setting would be 3 Gen 3 )

Fingers crossed ..

Supposedly they are also used for retro fitting OEM reversing sensors

1 hour ago, testy said:

Supposedly they are also used for retro fitting OEM reversing sensors

No thats wrong, I already did OEM reversing sensors, all that required is rear loom and sensors, holders and a module for £15 on eBay. I already did that last year. Works a treat and comes up on screen screen with diagram.

I believe that the mk8 that require to retro fit front AND rear parking sensors and has the requirement of a PAM (some don't like my mk7.5), require these ABS sensors (see https://www.forscan.org/forum/viewtopic.php?t=17697 )

On 3/1/2026 at 1:46 PM, testy said:

I believe that the mk8 that require to retro fit front AND rear parking sensors and has the requirement of a PAM (some don't like my mk7.5), require these ABS sensors (see https://www.forscan.org/forum/viewtopic.php?t=17697 )

Correct its same module for front and read sensors you can activate just the rear or both if you have them, no ABS sensors need changing for parking sensors.