Portland Bill Posted May 7, 2011 Share Posted May 7, 2011 Guys I've got a second hand Whitter towbar that I took off another Mondeo. Stupidly I didn't pay attention to the wires from which I disconnected the tow bar loom. I've identified all the wires of the loom to the pins in the socket, but I need to know which wires are which on the Ford loom going to the rear light cluster. It just has a straight connector plug numbered 1 - 6/7. Does anyone know? Cheers Kristian Quote Link to comment Share on other sites More sharing options...
dezwez Posted May 7, 2011 Share Posted May 7, 2011 Guys I've got a second hand Whitter towbar that I took off another Mondeo. Stupidly I didn't pay attention to the wires from which I disconnected the tow bar loom. I've identified all the wires of the loom to the pins in the socket, but I need to know which wires are which on the Ford loom going to the rear light cluster. It just has a straight connector plug numbered 1 - 6/7. Does anyone know? Cheers Kristian try this link LINK :) Test wires with test meter Quote Link to comment Share on other sites More sharing options...
Portland Bill Posted May 7, 2011 Author Share Posted May 7, 2011 Thanks for that. I was actually looking for the colours for the car's harness, but I found it after a good bit of rummaging around. Nevertheless, that'll help when I get around to wiring the S socket. I just needed enough for a basic light board for now. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.