Chopped Posted March 19, 2012 Share Posted March 19, 2012 hi there,,i am going to fit a new thermostat housing kit on a KA 53 plate with the duratec engine is it wise to use any gasket seal blue gasket for example when mating the two surfaces together there is a new rubber gasket that came with the housing i have removed the old housing and gasket because it was seeping abit and was thinking to use blue gasket to help seal it up ??? many thanks,,, Quote Link to comment Share on other sites More sharing options...
stef123 Posted March 19, 2012 Share Posted March 19, 2012 if the mating surfaces are clean and flat just the gasket should be fine Quote Link to comment Share on other sites More sharing options...
delboy Posted March 20, 2012 Share Posted March 20, 2012 just the gasket no sealant & dont over tighten the bolts that hold it all in place Quote Link to comment Share on other sites More sharing options...
Chopped Posted March 20, 2012 Author Share Posted March 20, 2012 ok many thanks,,, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.