Reversing Sensors

Hi all,

Have fitted a set of reversing sensors to my 2012 1.4 TD is that a Mk 7? not sure.

My question is about the little display unit, that I have at the moment sitting on my rear parcel shelf, was wondering if anyone had installed it on the the center of the dash just in front of the menu screen (where it looks quite at home and placed correctly does not obscure the drivers view) but would require a hole drilled into the dash, has anyone tried fitting it here? if so, is there easy access for the wire to come down to the fuse panel behind the glove box.

I have tried getting my hand in but not far enough to feel under the menu screen although, I can only get my finger tips there but still am a few inches of where I would like to be before attempting to drill a hole.

The sensor fitting went well thanks to the guides on this forum, would like to thank all of those that have taken the time to share their experiences.

Finally I have noticed a dull redish strip of light on the edge where the glove box shuts to, can anyone throw some light (excuse the pun) on what this is for? doesn't seem to do anything and appears of no apparent use for anything but drain the battery.

Thanks in advance for your help.

Best Regards

Tumbo