Jump to content
Do Not Sell My Personal Information

Just Ordered Crystal Black Side Repeters


b4zz
 Share

Recommended Posts

as title just came across a set of crystal black mirror indicators for the ford focus mk2.5 and ordered a pair so should get them on Friday and will post up on here what I think of them.

sorry its not letting me put up a link for some reson

Link to comment
Share on other sites


I've got a set for mine.

One cracked when I tried to fit it so the supplier replaced it, then refitting the set I had to do a small bit of filing on the plastic catches as they weren't locking into place despite the lamp being fully fitted into the mirror.

Also had some problems with condensation so drilled small hole in bottom of each lamp as a vent. Was still getting condensation on one side and had to reseal the lens to the body where it had very slightly opened up letting moisture into a section that's blanked off inside hence my original vent hole not helping.

All seems ok now :)

Link to comment
Share on other sites

thats great to know. I take it I just use a hair dryer to split them open then just reseal with some silicon job done. no more condensation .

Link to comment
Share on other sites

I just used an air line at low pressure to confirm where the leak was then just opened the join up enough to get a little bit of silicon sealant in using a small pin. didn't fancy opening up the whole assembly. Tried that with a clear lamp I bought for a possible project and it ended up breaking the lens.

Link to comment
Share on other sites

ok cheers for the info fella.

recived them yesterday so very quick delivery.

hopefully give the car a wash some time over the weekend and then will fit the indicators and see if they mist up.

if they do will have to try what you have done and then hopefully that will sort them out.

sounds silly but presume I could use some clear silicon bathroom sealent to seal them back up?

Link to comment
Share on other sites


You could probably use the bathroom sealant, I just used some clear instant gasket I had left over from another job. But that was only for sealing the small section at one end rather than bonding the whole thing together. An aftermarket clear lens I bought in order to dismantle as part of a project was glued together and broke as I tried getting it apart.

Link to comment
Share on other sites

ok cheers fella will hopefully be fitting them tomorrow after the car has had a wash and hopefully they wount mist up.

but if they do I will give what you said a try

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support