Jump to content
Do Not Sell My Personal Information

Conversion Zetec To Zetec S

Recommended Posts

Hi guys.

Looking to modify my factory stock zetec to zetec s, visual only.

Is anybody aware of what the difference is between the two specs?

Was wondering if anyone knew what I needed to get other than rear spoiler, bumpers, honeycomb grille and S badges?

Also if there is a cost saving method as the bumpers look almost identical?

Cheers in advance.



Link to comment
Share on other sites


A friend of mine has a 1.0T EcoBoost and he decided to do the same.

He changed the rear spoiler, rear bumper, added side-skirt's, honeycomb grille's and added an S badge, the lot was done by a bodyshop and I remember them saying it wasn't an easy job, especially the side-skirts.

He also changed his alloys to non-stock 17's but apart from the difference to the pulling power being noticeable afterwards and wanting more power anyway, he had a Bluefin remap to up it to 140bhp, which made a big difference!

You can find his project thread here : http://www.fordownersclub.com/forums/index.php?/topic/64599-Fiesta-Mk-7%2E5-1%2E0-Ecoboost-100Ps---%28Upgrade%29 in it he lists the places he got his parts from, however your best place for cheaper parts is probably scouring the "For Sale" sections of forums. Other than the bits mentioned above I believe the Zetec S sits slightly lower than standard models so if you wanted to go the whole hog you might want to get some springs.

Hope this helps!

Good Luck,


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...