Anyone help please with something I find confusing as a newcomer to Fords.

I have a 2011 Fiesta Automatic 1.4L, otherwise basic no bling except A/C.

The numbers are all correct on the car plates and documents.

I dont understand why at the top of the Vin plate on the drivers side door panel it shows as Titanium & 1-4 Duratec

I thought that Titanium was for the top of the range? and thought the engine would be Zetec.

The car does not have any badges on the rear passenger side where sometimes I see Zetec, Titanium etc.

Could someone please explain Titanium and Duratec

Thanks

Anyone help please with something I find confusing as a newcomer to Fords.

I have a 2011 Fiesta Automatic 1.4L, otherwise basic no bling except A/C.

The numbers are all correct on the car plates and documents.

I dont understand why at the top of the Vin plate on the drivers side door panel it shows as Titanium & 1-4 Duratec

I thought that Titanium was for the top of the range? and thought the engine would be Zetec.

The car does not have any badges on the rear passenger side where sometimes I see Zetec, Titanium etc.

Could someone please explain Titanium and Duratec

Thanks

Duratec is the type of engine- which is the fiesta type of model.

The Zetec is the spec of a car, generally goes style/studio, zetec then titanium in terms of going up the spec ladder. If you go onto the ford etis website you will find out the information about the car.

OK Thank you

My previous fiesta was a 2011 Zetec, but the vin plate had titanium on it. I think that there was a batch of vin plates that got marked up as titanium by accident.

Crikey thats good quality control,