I have a focus zetecs 2010 and need some advice which bluetooth module will go with my cd 6000 HU 7M5T18C815BD

Thanks

A module with part number 8M5T-19G488-Ax (the x can be any letter) will work without any problems.

A module with part number 8M5T-19C112-Ax or CS7T-14D212-Ax will also be suitable. These modules support USB and Bluetooth Audio but these functions are only supported by the GEN 3 Sony radio's and the Travelpilot FX and NX. On the 6000 CD these functions will not be available.

Note that a used module (with the part numbers mentioned above) from a Focus MK2.5, C-max MK1.5 or Kuga MK1 will be plug and play. Modules from different Ford models needs to be reconfigured to make it work.

Thank you very much pal been looking for this answer all over the net now i can crack on with buying the parts what else would i need with this ie microphone if you've got time to answer

To retrofit the Bluetooth/Voicecontrol system you need the following parts:

* Bluetooth/Voicecontrol module.

* Bracket and mounting hardware to install the module to the support beam behind the dashboard.

* Radio remote with VOICE button.

* Microphone.

* Wiring loom (only needed if there is no wiring installed).

Your a star

also when i have this lot installed will i be able to see my contacts on the headunit

Sorry to pester you i have no idea what parts i need

is the radio remote with voice button the stalk

and i would have thought all fords would have the loom fitted

Thanks

With this system all contacts and phone information will be shown on the radio display. After the system has bee retrofitted a phone menu inside the radio menu will be unlocked. the phone functions can be selected in this menu.

The wiring for the Bluetooth/Voicecontrol system is not present on every Focus MK2/MK2.5. Generally the wiring will only be present on high spec vehicles or vehicles which have options that require the high spec wiring loom.

Thanks again pal ive been searching since 6 oclock again for the model number of the wiring harness which will fit my radio doing my head in

Any idea pal

Hi again. Stressing now over this. Any idea of the model number of the wiring loom I need to go with my unit

me again got the parts but not the voice stalk would i need this or be ok without it

Finally getting there

Without the stalk with VOICE button the Bluetooth functions will be working but you can not use the Voicecontrol function which in my opinion is one of the key features of the Bluetooth/Voicecontrol system.

Thanks pal. Just struggling find one. Hard enough finding module and microphone any ideas wer I can get one

http://www.ebay.co.uk/itm/ford-focus-radio-voice-control-module-st-225-titanium-/271904662662?hash=item3f4ec7e486

Big thanks pal. It will work in a 10 plate zetec won't it

No reason why it wouldn't

Can I ask would this module fit my focus its from abroad sorry to pester

http://www.ebay.co.uk/ulk/itm/121721849445

Yes, this type of module should work fine.

just one more question then im gonna buy the lot will it all be compatible with mt head unit cd6000 7M5T18C815BD

Any idea what best microphone I could use in a focus 10 plate and cud I fit a speaker interior light unit in as I've just got a microphone stuck to roof lining any idea where and how to mount it

Thanks

me again bought all parts hopefully this is all i ll need heres pic

http://i1006.photobucket.com/albums/af184/mac74lee/bt%20kiy/kit_zpspefjg6xr.jpg

Help. Fitted bt kit but found out need the mic loom thought it would have been there.

Any ideas where and part number I need

Thanks

Covered via PM.