Warrillow Posted December 19, 2015 Share Posted December 19, 2015 Hi, I have replaced the powersteering pipes on my 2006 Ford Focus. I inserted the union into the pump first and then put the pipe into the union. My problem is that it is leaking between the pipe and union despite the pipe going all the way in and the locating bracket being done up tight. For some reason the pipe can be pulled straight out of the union and from what i understand once the union has been put on the pipe it wont come off. Can any one shed any light on what the problem is, have i missed something or done something wrong? Quote Link to comment Share on other sites More sharing options...
iantt Posted December 19, 2015 Share Posted December 19, 2015 Have you got the right union, ford show 2 different unions , check the old and new are identical, you need to force the pipe in union quite hard. Quote Link to comment Share on other sites More sharing options...
Warrillow Posted December 19, 2015 Author Share Posted December 19, 2015 Thanks for the reply, Do you happen to know if the difference between the 2 are the internal hole as the union fits in the pump ok? Quote Link to comment Share on other sites More sharing options...
iantt Posted December 20, 2015 Share Posted December 20, 2015 both will fit in pump , one is slightly longer in length,and pipe wont clip in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.