I've decided i'm going to wrap the roof and mirror caps on my next ST (stealth). Was a tricky decision between gloss black, matte black or carbon; but think I've settled on matte black. Was going to pay someone to do it, but decided I'm going to give it a go myself!

1. Does anyone know how to remove the aerial base from the roof? Would much rather take this off so the wrap will go underneath rather than make a pigs ear of cutting round it.

2. Do the trim pieces down either side just pull off?

3. Wanted to get peoples opinion on whether to wrap the separated part of the spoiler (see pic)?

Is the aerial at the front? If so the nut will be behind your interior courtesy light.

The plastic trims are fixed by a special tape which can only be bought from ford it is extra thick. At least that's what I've been told

I would just do the roof first see how it looks

Sent from my iPhone using Ford OC mobile app

It's at the back... That's what's stumped me. Perhaps I would have to remove the rear courtesy light, doesn't really look far back enough though.

Was hoping that the trim is just kinda clipped on. Should still be possible to wrap without removing them though I think.

You'll probably need to drop the rear end of the headliner to reach the a rail base, be worth the effort though.

Yes wrap the piece at the top of the tailgate and continue into the opening sections of the spoiler. Best pic I could find so far.