How easy would it be to fit the heated recaros from a MK3 ST to a Titanium spec MK3 and have the heated seats and electrics work? Same for fitting the TitX half leathers to a Titanium. Anyone done this or know what's involved?

I'm thinking the TitX ones would be easier as the wiring could already be there in the Titanium spec?

Thinking out loud....

Sent from the pub with a pint in the other hand.

ive put recaros in my tit x and they heat up. was fairly easy.look behind the switch panel see if you have the switch plugs then its just bringing the wires from passenger foot well to the seats.

ive put recaros in my tit x and they heat up. was fairly easy.look behind the switch panel see if you have the switch plugs then its just bringing the wires from passenger foot well to the seats.

The switch panel beside the handbrake? I'm assuming I'd need to add a fuse for the heated elements too ?

Sent from the pub with a pint in the other hand.

Do you have a pic of the seats installed ?

47 minutes ago, kpg said:

Do you have a pic of the seats installed ?

its the panel that the heated screen button is on.mine is only a mk2.5 tit.you will have to add a fuse .i hadf to run a wire from the fuse box to the seat plug to power them.plus 2 wires from passenger foot well .

Do you have a pic of the seats installed ?

its the panel that the heated screen button is on.mine is only a mk2.5 tit.you will have to add a fuse .i hadf to run a wire from the fuse box to the seat plug to power them.plus 2 wires from passenger foot well .

Ah ok thanks. I'll have a look at the connectors under the seats I have and search for the button connections. If the connectors are there it should just be a case of putting the fuse in hopefully. I might have to activate the seats using Forscan or something.

Sent from the pub with a pint in the other hand.

2 hours ago, kpg said:

its the panel that the heated screen button is on.mine is only a mk2.5 tit.you will have to add a fuse .i hadf to run a wire from the fuse box to the seat plug to power them.plus 2 wires from passenger foot well .

 

 

Ah ok thanks. I'll have a look at the connectors under the seats I have and search for the button connections. If the connectors are there it should just be a case of putting the fuse in hopefully. I might have to activate the seats using Forscan or something.

Sent from the pub with a pint in the other hand.

you wont have to use elm .its just fuse and wireing or just fuse

I've been reading up on Installing the ST seats and come across this post on another forum that mentions switching over the occupancy sensor from the old passenger seat to the new ones:

http://forums.focaljet.com/showthread.php/676289-FRPP-Recaro-seat-install-in-NA-Mk3-Focus

There's no mention of the seas being heated but one of the pics shows the heat switches. I would need to check what wiring is present in my car before I purchase anything.

Sent from the pub with a pint in the other hand.

know the zetec hasnt got wiring at all at seats or in switch area.

I just went out for a look under the area where the switches would be:

Nothing. Damn.

Although there's a fuse present at number 85 in the passenger fuse box for the switches (amongst other things):

And two fuses in number 34 and 35 in the rear fuse box for driver and passenger heated seats:

Everything seems to be there so far apart from the wiring for the switches. Which I'm guessing can't be bought and added.

Sent from the pub with a pint in the other hand.

18 minutes ago, kpg said:

I've been reading up on Installing the ST seats and come across this post on another forum that mentions switching over the occupancy sensor from the old passenger seat to the new ones:

http://forums.focaljet.com/showthread.php/676289-FRPP-Recaro-seat-install-in-NA-Mk3-Focus

There's no mention of the seas being heated but one of the pics shows the heat switches. I would need to check what wiring is present in my car before I purchase anything.

Sent from the pub with a pint in the other hand.

id love mk 3 leather seats

I've been reading up on Installing the ST seats and come across this post on another forum that mentions switching over the occupancy sensor from the old passenger seat to the new ones:

http://forums.focaljet.com/showthread.php/676289-FRPP-Recaro-seat-install-in-NA-Mk3-Focus

There's no mention of the seas being heated but one of the pics shows the heat switches. I would need to check what wiring is present in my car before I purchase anything.

Sent from the pub with a pint in the other hand.

id love mk 3 leather seats

Me too lol But I'm doubting wether or not I can pull off the OEM route.

Sent from the pub with a pint in the other hand.

is the wiring under the seats?

37 minutes ago, kpg said:

I just went out for a look under the area where the switches would be:

Nothing. Damn.

Although there's a fuse present at number 85 in the passenger fuse box for the switches (amongst other things):

 

And two fuses in number 34 and 35 in the rear fuse box for driver and passenger heated seats:

 

Everything seems to be there so far apart from the wiring for the switches. Which I'm guessing can't be bought and added.

Sent from the pub with a pint in the other hand.

is that where they are supposed to be ? i was thinking you had a mk 2.5 just realised how wrong a was lol

is the wiring under the seats?

Haven't looked that far yet. Too dark at the minute. I'm already gathering info on a tailored leather seat covers and DIY heat elements route lol Preparing for bad news RE wiring under my seats.

Sent from the pub with a pint in the other hand.

I'm thinking of fitting a heated seat kit made by xvision, it's a ford approved kit I'm led to believe

If I can't go the OEM route I'll probably get something like this:

http://www.ebay.co.uk/itm/Universal-Heated-Seat-kit-for-2-seats-bottom-back-with-2-Temperature-settings-/141830989874?hash=item2105c92832:g:peAAAOSwd4tUDdSN

and follow this "How to..."

I've also found this guy near me that does custom tailored seat covers which, if i decide to get these, would allow me to tape the heat pads on the outside of my seats instead of trying to put them on the inside of the material = seat covers go over the top = hides the heat pads.

Here's the link to the dude:

Car Seat Covers Direct

14 hours ago, kpg said:

If I can't go the OEM route I'll probably get something like this:

http://www.ebay.co.uk/itm/Universal-Heated-Seat-kit-for-2-seats-bottom-back-with-2-Temperature-settings-/141830989874?hash=item2105c92832:g:peAAAOSwd4tUDdSN

and follow this "How to..."

I've also found this guy near me that does custom tailored seat covers which, if i decide to get these, would allow me to tape the heat pads on the outside of my seats instead of trying to put them on the inside of the material = seat covers go over the top = hides the heat pads.

Here's the link to the dude:

Car Seat Covers Direct

dont like those seat covers.why dont you get a company to retrim the seats in leather and at same time have heated seats done

If I can't go the OEM route I'll probably get something like this:

http://www.ebay.co.uk/itm/Universal-Heated-Seat-kit-for-2-seats-bottom-back-with-2-Temperature-settings-/141830989874?hash=item2105c92832:g:peAAAOSwd4tUDdSN

and follow this "How to..."

I've also found this guy near me that does custom tailored seat covers which, if i decide to get these, would allow me to tape the heat pads on the outside of my seats instead of trying to put them on the inside of the material = seat covers go over the top = hides the heat pads.

Here's the link to the dude:

Car Seat Covers Direct

dont like those seat covers.why dont you get a company to retrim the seats in leather and at same time have heated seats done

.

Sent from the pub with a pint in the other hand.

I was also thinking about maybe eating the ST2 non heated seats, the red trimmed ones. At least the electric adjustment and airbags would work plug n play

46 minutes ago, kpg said:

 

dont like those seat covers.why dont you get a company to retrim the seats in leather and at same time have heated seats done

 

 

 

.

 

Sent from the pub with a pint in the other hand.

I was also thinking about maybe eating the ST2 non heated seats, the red trimmed ones. At least the electric adjustment and airbags would work plug n play

eating ? id like to see that lol

 

dont like those seat covers.why dont you get a company to retrim the seats in leather and at same time have heated seats done

 

 

 

.

 

Sent from the pub with a pint in the other hand.

I was also thinking about maybe eating the ST2 non heated seats, the red trimmed ones. At least the electric adjustment and airbags would work plug n play

eating ? id like to see that lol

I think they would taste good.

Sent from the pub with a pint in the other hand.