Gavin01 Posted May 29, 2017 Share Posted May 29, 2017 Hi guys, so I have a cone filter fitted. See below. Im thinking of replacing the intake pipe after the filter to the block with some aluminum pipework. As far as I can tell, there are no extra gubbins attached the current intake pipe. The kit i'm looking at getting is an inexpensive kit from eBay that comes in sections, meaning I can more or less fit it so it is straight replacement. http://www.ebay.co.uk/itm/3-034-76MM-Universal-Performance-Cold-Air-Filter-Feed-Induction-Intake-Pipe-Hose-Kit-/361847944346? The kit has a section of pipe called a vacuum pickup section. My question is, what is the purpose of the vacuum pickup section? As you can see the breather tube from the block still returns to the original air box ( this is how I run it, with the lid off ). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.