Hi guys, I've discovered some wiring behind the carpet on the drivers side in the boot, does anyone know what they're? Can I add some awesome gadgets using these wires? :D I tried to get a photo! 

6 hours ago, Jordan99 said:

Hi guys, I've discovered some wiring behind the carpet on the drivers side in the boot, does anyone know what they're? Can I add some awesome gadgets using these wires? :D I tried to get a photo! 

Wiring for the reverse sensor module, personally I think it looks cleaner with a camera in the boot handle instead of dimples on the bumper,

Here's some guides may help if fitting a reverse camera: 

Guide to Fitting Aftermarket headunit focus Mk2 & Mk2.5 Click Here

Guide Installing Reverse Camera Focus Mk2.5 2008 - 2011Click Here 

Guide To Fitting Second Reverse Light Ford Focus Mk2.5 Click Here 

Also here's a guide which the positive cable should already be there for: 

Guide to Fitting additional 12v Socket in Boot of Focus Click Here

Lenny, I was attempting to follow your guide for fitting an additional 12v socket in the boot, how ever I don't have a Orange plug, I do have the black one (seen in the photo). Do you think that's the power lead? 

6 minutes ago, Jordan99 said:

Lenny, I was attempting to follow your guide for fitting an additional 12v socket in the boot, how ever I don't have a Orange plug, I do have the black one (seen in the photo). Do you think that's the power lead? 

Looks a bit thin.

Early models didn't have it atall

I'll get my multi meter on it. If that isn't a power lead, are there any other wires in that area which I can piggyback power off? Thanks 

2 hours ago, Jordan99 said:

I'll get my multi meter on it. If that isn't a power lead, are there any other wires in that area which I can piggyback power off? Thanks 

If there's not one there then the only option is to run one from the battery or the centre console, 

It takes a large diameter of cable to provide the 25Amp required by a 12v socket, using any lesser gauge of cable would overload the cable causing excessive heat build up and possibly fire.

9 hours ago, Lenny said:

If there's not one there then the only option is to run one from the battery or the centre console, 

It takes a large diameter of cable to provide the 25Amp required by a 12v socket, using any lesser gauge of cable would overload the cable causing excessive heat build up and possibly fire.

I do have a power cable I used in my old sub, I think that should be thick enough haha 

3 hours ago, Jordan99 said:

I do have a power cable I used in my old sub, I think that should be thick enough haha 

Surly would either 8AWG or 4AWG just fit a 25Amp fuse 

Cheers mate, I think I'm going to do it. Handy when you've got a fridge in the boot for a long trip