Sign in to follow this  
Muskovardo

Need Help With Stereo 2011 Focus

Recommended Posts

Hi Guys

 

Just bought a new after market stereo and foolishly thought it would come with the plug on the cables. Long story short it didn't and I cant seem to find the adapter I need to fit.

Does anyone know how I can make sense of which cable is which on the car side so that I can just wire it myself? Or does anyone have any solutions for me? Ive added pictures to the link below to show you all the information I have. 

 

https://imgur.com/a/QP7Ed

 

Cheers in advance

 

Share this post


Link to post
Share on other sites
2 hours ago, Muskovardo said:

how I can make sense of which cable is which on the car side so that I can just wire it myself?

Does the car connector look something like this:

FordFocusQuadlockPinout-620x465.jpg

Connector A (Speakers & Power)

Pin 1 – Rear Right +
Pin 2 – Front Right +
Pin 3 – Front Left +
Pin 4 – Rear Left +
Pin 5 – Rear Right  –
Pin 6 – Front Right –
Pin 7 – Front Left –
Pin 8 – Rear Left –

Pin 9 – CAN Bus +
Pin 10 – CAN Bus –
Pin 11 – Keycode Ground
Pin 12 – Ground
Pin 13 – Alarm Sensor
Pin 14 – Illumination
Pin 15 – battery 12v + (Permanent Live)
Pin 16 – 12v Ignition Live

 Connector B (Aux 1)

Pin 1 – Mono +
Pin 2 – Sw A +
Pin 3 – Aux In Left +
Pin 4 – Aux In Right +
Pin 5 – PTA
Pin 6 – SWC (Steering Wheel Control)

Pin 7 – Mono –
Pin 8 – SWC Ground
Pin 9 – Aux In Left –
Pin 10 – Aux In Right –
Pin 11 – Reverse Sensor Signal
Pin 12 – AVC (Speed Control Volume)

Connector C (Aux 1)

Pin 1 – RSE Left +
Pin 2 – RSE Right +
Pin 3 – Mono 2 +
Pin 4 – Sub Woofer +
Pin 5 – Aux 2 Left
Pin 6 – Audio Ground

Pin 7 – RSE Left –
Pin 8 – RSE Right –
Pin 9 – Mono 2 –
Pin 10 – Sub Woofer –
Pin 11 – Aux 2 Right
Pin 12 – Mic
 
Info "borrowed" from James Simpson's site:
 
There are many adapter cables available, especially for the standard ISO type radio connectors. But I can't see what sort of connector is on the stereo.
 
A lot of the above pins are not essential. Start with the 4 Speakers, Ground, battery+ (B+ on your sheet) and Ign live (ACC on your sheet), all on connector A. This should get the unit basically working.
 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this