Sign in to follow this  
angus5041

Focus 07 Wiring Loom

Recommended Posts

Hi All , Running terribly , no power then power , Previously was the loom in to the coil pack causing the problems , same thing again ,the diagnostic guy managed to sort it but tells me i need to get some more loom cut back as far as i can as the problem may/probably re-occur ,

 I dont fancy traipsing around the scrappys  tbh and have seen some looms on eBay with tags on with codes etc  , can anyone on here help with a code maybe ,  Cheers James

Share this post


Link to post
Share on other sites

By the look of it it describes your issue perfectly. It might be worth a shot over buying a whole new wiring loom.

Share this post


Link to post
Share on other sites

I havnt got round to it yet a friend said to me today have you checked the spark plugs , well no because the misfire seems to be caused by the coil pack {worn wires } . I done the test where you run the engine and pull out a spark plug lead and if the engine dips thats the faulty one , ok so far so good .the first one the engine dips ..yay found the problem   strange thing is tho the car idles with just that lead in the other three pulled out i mean all out the same time and no dip in the engine .. 3 plugs leads off  is that possible ??

Share this post


Link to post
Share on other sites

UPDATE . So I changed the three spark plugs no change , changed the coil everything  running normal .. for now. I dont want to touch anything else just yet 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this