Hi all,

When driving my mondeo i experience that the car is very difficult to drive smooth when changing gears.

 

I already fixed the acceleration shudder at 2500rpm by replacing the, maf,map,fps, boostsolenoid and new bosch sparkplug. Under acceleration that was an big improvement.

Still the car is not smooth while changing gears ( the gearlever itself is very light and smooth).

Now i noticed when car in neutral, and reving from idle slowly up to 3000rpm at 2200-2500rpm I feel a vibration in the whole car.

Does this indicates more engine mounts or duall mass flywheel? Or perhaps something else?

Thanks in advance

Nobody ever noticed this vibrations?

Sounds like engine mounts to me. I had a similar issue though it was on my 2.0ltr zetec, it was the rear mount (roll restrictor). Eventually the rubber let go and the vibration changed to a thud at every gear change.

Sent from my I3113 using Tapatalk

I have another side note for my problem!

When the engine is not fully warmed up the drive is much smoother.

So when the car is fully warmed up, the drive is not smooth.

Btw, when car is on ignition (not running) the etm is making a noise all the time. Is this normal? I already mechanically cleaned the etm