Balleknack Posted May 16, 2022 Share Posted May 16, 2022 On 1/5/2012 at 3:08 AM, Stoney871 said: Helped me out as well! Thank you! Radio Frequency Programming Instructions: Insert the ignition key and turn from position II (Ignition) to position 0 (All off) and back four times within three seconds. Remove the ignition key. The locking control system is now in "learn mode" for the next 20 seconds and the red warning system LED (By the clock) stays on continuously to indicate this. During the 20 seconds press one of the transmitter buttons. The remotes signal and code number is learned by the locking module and is indicated by flashing the warning system LED. Wait until learn mode times out (20 seconds) or switch the ignition back to ON. This should hopefully solve your problem.:) Quote Link to comment Share on other sites More sharing options...
dzincha Posted December 19, 2022 Share Posted December 19, 2022 Is it possible to adapt new key with switching ignition on/off as described above for Mondeo with keyless go(made 2021)? 1 Quote Link to comment Share on other sites More sharing options...
unofix Posted December 19, 2022 Share Posted December 19, 2022 6 hours ago, dzincha said: Is it possible to adapt new key with switching ignition on/off as described above for Mondeo with keyless go(made 2021)? Start a new thread and explain what it is that you want to do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.