38 minutes ago, calllumallan said:

Hello. 

Don't suppose you would have an updated link to this for a mk2.5 focus? I've been having a look around but my google skills aren't the greatest.

Thanks!

Hi 

Link here: http://www.ebay.ie/itm/281377090054

 

Or if you really like spending 

Here😥: http://www.autospecialists.co.uk/AS-Performance-Bonnet-Lifter-Kit-Ford-Focus-MK2-Product-1291.html

Hi Lenny, i bought these since feb but havent got round to it .may do it tomoro . Will be using your guide Is this an easy mod?

Yunii

Sent from my SM-G925F using Tapatalk

Hello mate

yes it's fairly easy mod just do one at a time and be careful when fitting the locking pins in to the ball ends. 

Once fitted it's a nice touch when opening the bonnet good luck and let me know how you get on

 

Hello mate

yes it's fairly easy mod just do one at a time and be careful when fitting the locking pins in to the ball ends. 

Once fitted it's a nice touch when opening the bonnet good luck and let me know how you get on

 

How did you go abouts with the bonnet hinge part ? Did u make a mark to its original resting place so bonnet doesnt move out of aligning.

How long did it take?

Yunii

Sent from my SM-G925F using Tapatalk

If you do one hung at a time then you should get away without marking bonnet I can't really remember how long it took the tricky part is working around the plastic trim on the wings and as I said before the small clips that secure the rod ends to the ball on the bracket. Good luck 😀

If you do one hung at a time then you should get away without marking bonnet I can't really remember how long it took the tricky part is working around the plastic trim on the wings and as I said before the small clips that secure the rod ends to the ball on the bracket. Good luck 😀

By the way I put the brackets on top of the hinge bracket and not In between as might be shown on some pictures 

Darren 

 

 

If you do one hung at a time then you should get away without marking bonnet I can't really remember how long it took the tricky part is working around the plastic trim on the wings and as I said before the small clips that secure the rod ends to the ball on the bracket. Good luck 😀

By the way I put the brackets on top of the hinge bracket and not In between as might be shown on some pictures 

Darren 

 

 

Any close up pics?

I will start it in morning.

Yunii

Sent from my SM-G925F using Tapatalk

Okay no problem hope these are okay 

Okay no problem hope these are okay 

Thanks, that explains heck of a lot by your images. Btw what region you from?

Yunii

Sent from my SM-G925F using Tapatalk

I live in Warwickshire glad the photos helps you 

Darren 

 

 

I've seen that on youtube

Thanks Lenny

Yunii

Sent from my SM-G925F using Tapatalk

4 hours ago, yunii said:

I've seen that on youtube

Thanks Lenny

There way of fitting the balljoints would be more accurate than mine to be fair 😅

Hi yunii

how did you get on with the bonnet struts?

Hi yunii

how did you get on with the bonnet struts?

Done & now admiring the finished job.

https://vimeo.com/190384327

Yunii

Sent from my SM-G925F using Tapatalk

Looks good did you have any trouble fitting them?

Darren

Looks good did you have any trouble fitting them?

Darren

No just sliced my finger trimming the wing plastic covers.

Yunii

Sent from my SM-G925F using Tapatalk

Me too lol

Darren