Skip to content
View in the app

A better way to browse. Learn more.
Ford Owners Club - Ford Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.



Join the Independent Ford Owners' Club

Our community has been built by enthusiasts, for enthusiasts, and proudly run by Ford owners' for over 18 years. As an independent, non-official club, everything you’ll find here, advice, support, and opinions, comes directly from members with genuine Ford ownership experience.

Join our friendly community... it's Free!

 

Ford Focus Mk2 1.6 Ti Vct Help

JackPayne
JackPayne
in Ford Focus Club

Featured Replies

I have a Ford Focus 2006 mk2 1.6 ti-vct and I Have Snapped The Plug That Goes On Coil Pack And Have 3 Cables (Orange And Black) (Green And Red) (Green And Black) I Need To Know What Wire Goes To What Pin So I Can Put New Plug On And Also Just To Double Check What Is The Leads Order On The Coil Pack Thanks

  • Quote


    • Author

    Can any one help

  • Quote

    There should be pin numbers casted into the connector housing. The wiring should be connected as following:

    Pin 1 = Black/Green = Ignition ground signal cilinder 1 and 4.

    Pin 2 = Green/Red = 12 Volt positive.

    Pin 3 = Black/Orange = Ignition ground signal cilinder 2 and 3.

  • Quote
    • Author

    Thanks and the ht leads go on the coil pack in which order for ex number 1 goes to top left slot number 4 goes bottom right

  • Quote

    Both the HT ignition leads and the coil pack should have numbers printed on them.

  • Quote
    • Author

    They haven't though

  • Quote

    If the coil pack and the HT ignition leads do not have the cilinder numbers printed on them they are most likely not original Ford (Motorcraft) parts.

    The HT leads of the coil pack should be connected as follows:

    Coilpack_zpscedd8c10.png

  • Quote
    • Author

    And is that for my model yeah and is pin 1 the bottom one if you looked at that diagram like that in the engine bay or the top one up

  • Quote

    • Latest Deals

    Ford UK Shop for genuine Ford parts & accessories

    Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Reply to this topic...
    Go to topic listing

    The "Digestive"

    • The Digestive Forum Roundup (31st May - 7th June 2026)

      Steve ·
      The Digestive Forum Roundup (31st May - 7th June 2026) We hope you’re all enjoying your week and finding time for some time enjoying your Ford! This week, our vibrant forum has been buzzing with discussions that touch on a diverse range of Ford models, from the Mondeo to the Fiesta and Focus. Here’s a recap of some key conversations that might pique your interest. Starting with the Mondeo, user Frenchspanner shared a particularly frustrating issue relating to a 'Immobiliser Active' message appea
      Steve
      Steve
      • 95 views





    Background Picker
    Customize Layout

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.