Im looking for an exhaust trim piece for my fiesta ecoboost 125. all of the tips ive seen online are 45 degree angle or straight, whereas the fiesta exhaust points down and to the right - bit weird.

Has anyone managed to get an exhaust trim/tip fitted?? (i dont want to have to buy a new exhaust system for the car, just purely for styling purposes)

 

Thanks!

Following

Cut the exhaust tip off so it's straight?

 

As Alzy stated. Cut the tip off your exhaust (doesn't have to be dead straight ) and get a chrome trim piece from Halfords. They have 2 or more sizes and good quality too unlike the cheap stuff online.

Cut this amount off -

Bolt the trim on -

I might do the exact same to my red edition. Looks nice for fora cheap mod. Got any different pictures bud

Looks like this -

 

Does the red edition need a new diffuser? Or is it posible to fitt this below the stock one?

Thanks for all the replies! 

Would that work on a standard Zetec s diffuser though, seen as yours is an ST?

19 hours ago, E5GDM said:

Looks like this -

 

 

3 hours ago, Keiren125 said:

Thanks for all the replies! 

Would that work on a standard Zetec s diffuser though, seen as yours is an ST?

 

Should fit if you angle the trim down a bit more. The photo shows a trim on my old Zetec S after I'd changed the standard diffuser for the ST one. 

Just checked, the cut out in the ZS diffuser is not in line with the exhaust if it's cut down.

Still stuck with this one!

I would also like to know about this....

I would also like to know about this i have the same problem with my focus...

The diffuser needs to be swapped for the ST one if you doing the exhaust mod.