Gel badges and s badge sorted! Maybe rs body kit next? Need ideas!

Also how do you fot the s badge. Do you go from under the car because i cant see a way through the bonnet without undoing a few screws

1 hour ago, Mitchell Rogers said:

Also how do you fot the s badge. Do you go from under the car because i cant see a way through the bonnet without undoing a few screws

You get the badge, the bolt, the back plate and one nut?

So it's pretty fiddly but first you need to assemble the badge so, badge + bolt then put the plate on then the nut. Now you need to feed it through the grill (I did the very bottom right hole of the honeycomb) so the plate/nut are now on the inside and the S is on the outside and the bolt obviously bridges the gap. Now you have to try and put your fingers through the grill and try to clamp the nut so the nut won't spin. You then twist the S badge until it is tight (hopefully it will be the correct orientation when it is tight but if it isn't then slacken it off, re align and tighten again).

this is the way i did it. think i need to change which honeycomb mines in tho, too far in and up. but yeah line it up and spin the s to tighten :)

 

Have a look at this post

 

Where are you getting your S badges? I've looked on eBay and they are all red. Can you get different colours?

 

Cheers im doing it tomorrow or atleast attempting lol. And i also got mine from ebay and the guy i bought it off also had other colours

Anyway you could link me Mitchell? I'd appreciate it, thanks

I've the Triple R Composites Splitter on order. Think it'll suit the Red/Black theme nicely. 

damn, i got my blue one off ebay for 13 quid, but i think there is a post on here with them listed at $3

2 hours ago, Crraigan said:

Anyway you could link me Mitchell? I'd appreciate it, thanks

He is called waj69 on eBay bud. He sells blue, black, white and red atm.

 

2 hours ago, opr said:

I've the Triple R Composites Splitter on order. Think it'll suit the Red/Black theme nicely. 

I want this! Looks so good but they're like 350, too expensive Imo.

You might be thinking of something else? The splitter cost £103 plus postage to Ireland. 

Thanks guys. Keep looking for bits to do and these posts give me ideas so cheers

14 hours ago, opr said:

You might be thinking of something else? The splitter cost £103 plus postage to Ireland. 

Doesnt the red edition already have this bumper bud?

This is the splitter I'm talking about -> Link

My Red Edition has a "splitter" style black lip in the middle of the front bumper but not a full splitter. I'm going to remove that and replace it with the full TRC splitter. 

Justfitted my s badge and badges. Think a miltek exhaust is next on the list although I don't want anything that's going to be deafening.

1 hour ago, BenK said:

Justfitted my s badge and badges. Think a miltek exhaust is next on the list although I don't want anything that's going to be deafening.

Mines the same but the red edition! Looks good

I'm also looking into the mountune kit but it's pretty expensive and I don't want it impacting my 3 year warranty. Exhaust next then I think it's a wait for the mountune. 

Im waiting for my warrenty to run before i do anything else