Hi

so finally I got myself dynamics pro race 1.2 in not bad condition but one of them is welded and that makes me scared to drive the car what you guys think is it safe or should I start looking for new one to replace the welded one ??? Also how much psi/bar goes into 205/40/17?? I usually put 32psi/2,2bar 

Welded! All depends on how good it was welded & how much - done by a guy in a shed or done by a professional wheel repairer.

I'd ditch it just to be on the safe side, some might say it will most likely be done properly,  but are you willing to test that welded bit as you push your car around a corner

You as the driver is the safest part of the car don't risk it! 

4 hours ago, Ian Lanc said:

Welded! All depends on how good it was welded & how much - done by a guy in a shed or done by a professional wheel repairer.

I'd ditch it just to be on the safe side, some might say it will most likely be done properly,  but are you willing to test that welded bit as you push your car around a corner

You as the driver is the safest part of the car don't risk it! 

Yeah I got rid of them and got my alloys back as I swapped then with my oz superturismo but got them back on my car now m, went to balance the buckled dynamics it wanted 35 grams !!!! Men in garage said anything more than 10grams chuck in bin and one was like I said 35 other 25 and other two were ok 5grams but no worth it