ajw361 Posted December 26, 2008 Share Posted December 26, 2008 HI ALL! MY GF'S STREET KA HAS A CLONK/RATTLE COMING FROM THE RONT SUSPENSION. IT HAS HAD IT SINCE WE BOUGHT IT 5 MONTHS AGO BUT I DROVE IT THE OTHER DAY AND IT SEEMS TO BE GETTING WORSE. ITS AN ANNOYING RATTLE WHICH SEEMS WORSE AT SLWER SPEEDS GOING OVER SMALL BUMPS NOT BIGGER POT HOLES? WOULD IT BE THE ANTI ROLL BAR BUSHES? HEARD THEY WERE A COMMON PROBLEM AND IS IT A DIY JOB? ITS A 2003 30K MILES? WOULD LIKE TO GET IT SORTED AS I THINK THE MOT IS DUE IN THE NEW YEAR. THANKS IN ADVANCE!! Quote Link to comment Share on other sites More sharing options...
delboy Posted December 27, 2008 Share Posted December 27, 2008 HI ALL! MY GF'S STREET KA HAS A CLONK/RATTLE COMING FROM THE RONT SUSPENSION. IT HAS HAD IT SINCE WE BOUGHT IT 5 MONTHS AGO BUT I DROVE IT THE OTHER DAY AND IT SEEMS TO BE GETTING WORSE. ITS AN ANNOYING RATTLE WHICH SEEMS WORSE AT SLWER SPEEDS GOING OVER SMALL BUMPS NOT BIGGER POT HOLES?WOULD IT BE THE ANTI ROLL BAR BUSHES? HEARD THEY WERE A COMMON PROBLEM AND IS IT A DIY JOB? ITS A 2003 30K MILES? WOULD LIKE TO GET IT SORTED AS I THINK THE MOT IS DUE IN THE NEW YEAR. THANKS IN ADVANCE!! hold onto the anti roll bar & pull it back & forth as the rubber bushes perish on them easy job to do & cost's about £5.00 for the parts. if it's not that them it maybe the droplink again an easy one to do push on the wing to make the car bounce & listen for any noise may be good to get someone to hold the drop link when doing this . if it's not either of them then it's the wish bone bit more work to do this but quite an easy job half a day to do both sides. costs about £30.. the pair look here for parts m8 www.buypartsby.co.uk need any more help just ask as i have done all this work on my cars recently Quote Link to comment Share on other sites More sharing options...
Quint Posted February 22, 2017 Share Posted February 22, 2017 Hi. Was this ever fixed? Would be interested on what happened and what was the source of the rattle as I'm battling similar issues. I've since replaced the shock mounts, the stab bar bushings, shocks are ok, lower arm assembly & ball joints ok. Only thing left are the drive shafts / CV joints, which I don't know is a source of rattles on 2.0 TDCis. On that topic, I would like to know if there are separate joint kits being sold, or just the whole drive shafts needs replacing. Would appreciate some feedback or experience of others who have a similar model. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.