As title after any help for the jacking/jack stands points on a mk3.5 focus st line.

Had a quick look online but had no joy any help and pictures would be much appreciated

Hope these are some help

thats great thank you jonro that's much appreciated. want to fit a front splitter the ramps I the front skirt just clears them to get on there but once the splitter goes on the car wount come back off

You can overcome that by putting wood at the end of your ramps so that the car levels out on the wood before dropping the car onto the road

 

1 hour ago, Jonro2009 said:

You can overcome that by putting wood at the end of your ramps so that the car levels out on the wood before dropping the car onto the road

 

ok assume the wood wount move?  what wood would i need. as i know it  would have to hold the wait of the car

All you are doing is laying wood directly onto the ground at the bottom of the ramps, so it doesn’t have to support any weight it is only there to keep the car high enough to clear the bottom of the ramp. I’ll try and find a visual to help as I may not describe it too well.

10 hours ago, Jonro2009 said:

All you are doing is laying wood directly onto the ground at the bottom of the ramps, so it doesn’t have to support any weight it is only there to keep the car high enough to clear the bottom of the ramp. I’ll try and find a visual to help as I may not describe it too well.

ok cheers jonro for the help its much appreciated