Fords4me Posted April 18, 2021 Share Posted April 18, 2021 Hi everyone. This relates to a 2014 Mk III Focus. The washer jets work fine in pre ignition mode, so it would seem that there are no blockages or a faulty pump. However, when the engine is started, there is just a dribble of water which comes out. Local Ford dealer is saying if it’s not the water pump, the car will need a whole new main circuit board costing 100’s of pounds. Any suggestions for a cheaper fix? Thanks. Quote Link to comment Share on other sites More sharing options...
F0CUE Posted April 18, 2021 Share Posted April 18, 2021 There is a problem with this year of focus where the pump leaks and tracks down the wiring into the bcm. Check for any corrosion on the plugs. 2 Quote Link to comment Share on other sites More sharing options...
Fords4me Posted April 18, 2021 Author Share Posted April 18, 2021 1 hour ago, F0CUE said: There is a problem with this year of focus where the pump leaks and tracks down the wiring into the bcm. Check for any corrosion on the plugs. 1 hour ago, F0CUE said: There is a problem with this year of focus where the pump leaks and tracks down the wiring into the bcm. Check for any corrosion on the plugs. Thanks for the suggestion. I will take a look at the plugs and see if there is any sign of corrosion. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.