Bluetooth Conversion to Sync 3

[tomgarratt93]

Hi all,

I'm upgrading my 62 plate fiesta titanium with bluetooth voice control (FORD AUDIO) when connecting my phone.

I'm looking for the 54 pin connector wiring diagram so I can make the relevant connections to a sync 3 APIM.

I've searched high and low for this info, but keep coming across conflicting info across various forums.

Any help would be greatly appreciated.

Current module is 8m5t-19c112-at.

 

Thanks in advance!

Tom

[Neb_engineer]

Mate your car isn't actually compatible with sync anything

[tomgarratt93]

Oh really? I thought you could tap in to the can lines and power a sync 3 apim? The module i mentioned has a 54 pin connector, so surely it's just a case of re-pinning to match the sync 3 apim.

Thanks,

 

[unofix]

On 3/13/2022 at 7:37 PM, Neb_engineer said:

Mate your car isn't actually compatible with sync anything

As has been said above.

1 hour ago, tomgarratt93 said:

I thought you could tap in to the can lines and power a sync 3 apim?

I assume you are referring to the Canbus lines. If that is the case then you are misunderstanding what canbus is.

[tomgarratt93]

I'm not fully aware of Canbus lines, but didn't mean to say they solely power the sync unit. I assume they are important to the sync unit working? 

Is there a pin schedule for the unit I mentioned in my initial post? I've hunted high and low, but maybe you know where might be best to find that info?

Thanks,