Jump to content
Do Not Sell My Personal Information


No communications ecm/pcm


unimatrix1
 Share

Recommended Posts

Smax 2.0 tdci 6 speed manual 2008

Car cranks but no start engine malfunction light on and immobiliser active, I've checked all fuses and they're fine.

Checked spare key incase of chip but thus didn't make any difference.

Checked all connectors going to the board under the glove box to make sure none was loose.

Any advice and suggestions on this one?

Could it possibly be a bad earth through the wiring somewhere and does anyone know what wire is the earth's I should be checking?

Link to comment
Share on other sites

  • 10 months later...

I had a similar problem when car would not crank it was saying immo active even tho I had correct keys got for scan tried relearning the keys no avail in the end took it to a auto electrician turns out broken wire going to abs module got it fixed costing £280 a week before Christmas 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership