I replaced the fuel return pipes on my mk7 1.4 fiesta now when I plug the wires back on number 4 the engine won't start. I unplug it and it runs on 3 but as soon as I plug number 4 on it cuts out.... Any surgestions????

I thought this was the place to get help and advice, yet not 1 comment on my post, thanks guys.

If people don’t have an answer they’ll tend not to reply.

2 hours ago, Martin ing said:

I thought this was the place to get help and advice, yet not 1 comment on my post, thanks guys.

This kind of comment isn't going to do you any favours. 

What was your original post and question?

I changed the fuel return pipes then when I put everything back together it ran rough and number 4 injector isn't working get all was fine before , it's pickled my head, 

 

process of elimination swap the injectors over, see if its that or the pipework before it

5 hours ago, JImpster said:

process of elimination swap the injectors over, see if its that or the pipework before it

Ok thanks 

Is it true that Siemens injectors don't need codeing, I read this on fordtalk, has anyone heard the same ?

 

1 hour ago, Martin ing said:

Is it true that Siemens injectors don't need codeing, I read this on fordtalk, has anyone heard the same ?

 

i have a 2007 model 1.4 tdci fiesta and i can tell you on that i have changed 2 injectors (they are siemens) and i havent needed to code them. from what i know its the bosh injectors that need coding.

Thanks for that, that's a repeat .

Releaf