Has anyone attempted to/successfully fit power folding mirrors to a mk7.5 Zetec. Wondering about the wiring ie 8 pin 10 pin bla bla

Is you car a 3 door or 5 door ?

If 5 door does it have electric windows on the back doors ?

11 hours ago, unofix said:

Is you car a 3 door or 5 door ?

If 5 door does it have electric windows on the back doors ?

5 door, and no it doesn’t have electric windows at the back.

The problem with the Fiesta that doesn't have electric windows on the back door is that it will need both front door control modules replaced, and of course the missing wiring added.

I seem to remember that this has been attempted a few times but I don't recall anyone getting it to work completely.

This post might be of help to you:

On 10/7/2020 at 12:50 PM, TJR121 said:

Hey, i have just recently changed my standard electric mirrors to power folding mirrors and it was very easy to do.

 

You will need a few things, make sure your car has the same fuse layout as a titanium model, also im not sure if this will work with the 5dr as you may need a module, but this will work if you have a 3dr just make sure you have the same fuse box as a model that comes standard with folding mirrors. Once you have done this you will then need to buy the folding mirrors either brand new or second hand, just make sure they are 100% power folding, here is a link https://www.eurocarparts.com/p/macht-mirror-assembly-489593101           just go off this, make sure you buy both sides, you will find them cheaper second hand. Once you have got them you will need the switch for the inside of the car   https://www.ebay.co.uk/itm/FORD-FIESTA-MK7-2012-2017-5-DOOR-WINDOW-POWER-FOLD-MIRROR-CONTROL-SWITCH/184440224894?epid=2233776602&hash=item2af17e7c7e:g:zWAAAOSwJZVesr~s        Something like this. Then install the switch and the wing mirrors, once you have dont this make sure the mirrors and switch work but moving the glass from the switch to test your mirrors YOU WILL NOT have power folding mirrors yet, you will need to download forscan and apply for the extended licence once you get excepted you will need to order one of these obd switches   https://www.amazon.co.uk/ELMconfig-500kbit-compatible-interface-diagnostics/dp/B01F0GVBWY/ref=sr_1_1?dchild=1&keywords=forscan+obd2&qid=1602071257&s=outdoors&sr=1-1             making sure its got the little switch, once you have done this plug it into your laptop and the other side into your car then you can find a online video on how to use forscan and just start looking for the option in menu hidden 2 called "rear view electric mirror" or something like that then enable it, YOUR DONE when you lock the car the mirrors will go in and when you unlock then fold out, this also means your switch will now work!  

Hope this helped feel free to message me if you need any further help!

TJ!

 

9 minutes ago, unofix said:

This post might be of help to you:

 

You’re amazing mate, I’ve ordered the switch to replace the one I have now, and the power folding mirrors, I’m set up with forscan so Im just going to take the door card off and check my wiring.

2 hours ago, Joshmoore02 said:

You’re amazing mate, I’ve ordered the switch to replace the one I have now, and the power folding mirrors, I’m set up with forscan so Im just going to take the door card off and check my wiring.

Checked my wiring, it’s got the correct loom on the car side so they’ll physically fit, I’ll just need to research more about the door control module. Cheers for your help mate

I don't know too much about the door control modules (PDM and DDM) but if I understand correctly (but I might well be wrong) it is only the door modules that can control both front and rear electric windows that can also control the power fold mirrors.