Neil357 Posted March 31 Share Posted March 31 I have had my car a week, the following warning coming up, Hill assist, pre collision unavailable. Garage that checked codes said too many codes coming up must be battery. See attached. Thoughts? thanks Quote Link to comment Share on other sites More sharing options...
alexp999 Posted March 31 Share Posted March 31 Hill assist usually points to an abs sensor problem but it doesn’t look like that was scanned in that photo. Forscan should be able to scan everything rather than a generic diagnostics. 1 Quote Link to comment Share on other sites More sharing options...
Neil357 Posted March 31 Author Share Posted March 31 It was a full scan the day after having a scan having no codes coming up the day before. I will put my obd2 reader on it but did not want to remove codes. If it is an ABS sensor I thought the ABS light on dash would light up? Thanks Quote Link to comment Share on other sites More sharing options...
alexp999 Posted March 31 Share Posted March 31 If that print out is everything then about half of the modules in the car haven’t been scanned. The ABS sensor is just one possibility. The ABS module will usually log a fault if hill start is not available but I can’t see it in your print out as having been scanned. Quote Link to comment Share on other sites More sharing options...
unofix Posted March 31 Share Posted March 31 You're using a generic code scanner. It will not read Ford specific DTC's. You need to buy the Ford workshop diagnostic tool, for £2000 ? Or you need to use FORScan and a vLinker FS lead, which will cost around £34 FORScan for Windows (free): https://forscan.org/download.html vLinker FS cable: https://www.amazon.co.uk/Vgate-vLinker-Adapter-FORScan-MS-CAN/dp/B0952P4MLP Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.df7219cc830786c986f099aeaf78a7ef.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.