Hi, i have tried to install a apple car play radio to my 2012 plate ford smax, orginal radio was working perfect before trying to fit this new radio in. After fitting the new radio, i tried turning it on but it did not power up. I then refitted orginal radio back in and now that is not powering up. Checked 15A fuse under the glove box stated in the fuse diagram and that is ok, i was wondering if anyone has any ideas?

thanks

Try F21 as well.

7 minutes ago, TomsFocus said:

Try F21 as well.

That was the only one i tired as thats the only one i can find found the radio, is there anymore that could have blown? 

4 minutes ago, Wayne Dunn said:

That was the only one i tired as thats the only one i can find found the radio, is there anymore that could have blown? 

F21 should be 30A.

F43 is 15A so that's the one I assumed you'd checked.

EDIT - Those two are in the engine bay fusebox labeled 'audio'.

I now see F21 inside is labeled radio.  That's not confusing at all lol...

5 minutes ago, TomsFocus said:

F21 should be 30A.

F43 is 15A so that's the one I assumed you'd checked.

On the diagram is says 15A for F21.

Ive checked both fuses in the boot that are both audio related and they arent blown. Trying looking for a inline fuse in the power circuit but could not find one.

Yes, I've edited post above.  F21 & F43 in the engine bay fusebox are both for audio as well.

16 minutes ago, TomsFocus said:

Yes, I've edited post above.  F21 & F43 in the engine bay fusebox are both for audio as well.

Found F43 blown in the engine bay fusebox. Cheers for that mate been pulling my hair out haha.