Hi, I have a 2020 Fiesta st Line with sync 2.5. I wanted to know how I can add the Ford performance writing, window locking, horn when locking the car and well, is there anything else I can add?

Just connect and go into each module and see what you can activate.

You will want to be looking in APIM, BCM and IPC

BEFORE you make ANY changes, make sure you save a copy on your PC of the standard, factory ASBUILT, in case anything goes wrong, then you can easily return the module back to standard.

Try and get in the habit of doing one change at a time and see if it works

I don't know what doable with Sync 2.5

Ford performance in cluster is doable

Global open/close will only work if you have x4 electric windows and the correct switches for one shot up & down

Auto locking will work too

Good luck

hi thanks for the reply. I managed to get the automatic closure, everything else wasn't. I don't know what as built codes to look at and where to put my hands. If you can help me. And yes I have 4 electric windows

12 hours ago, Ezrektio said:

hi thanks for the reply. I managed to get the automatic closure, everything else wasn't. I don't know what as built codes to look at and where to put my hands. If you can help me. And yes I have 4 electric windows

Search on the FORScan Forums for Global Open?close, it has been done, you may need to update firmware in door modules

Auto Locking should work, activate in BCM and IPC

Auto High Beam, if you have correct camera etc

Check the Forums, loads on Fiesta 8

Il 20/09/2023 alle 10:15, DaveT70 ha detto:

Basta connettersi e andare in ogni modulo e vedere cosa puoi attivare.

Vorrai cercare in APIM, BCM e IPC

PRIMA di apportare QUALSIASI modifica, assicurati di salvare una copia sul tuo PC dello standard, ASBUILT di fabbrica, nel caso in cui qualcosa vada storto, allora puoi facilmente riportare il modulo allo standard.

Prova a prendere l'abitudine di fare un cambiamento alla volta e vedi se funziona

Non so cosa sia fattibile con Sync 2.5

Le prestazioni Ford nel cluster sono fattibile

L'apertura/la chiusura globale funzionerà solo se si dispone di finestre elettriche x4 e gli interruttori corretti per un colpo su e giù

Anche il blocco automatico funzionerà

Buona fortuna

and how do I update the port firmware?

15 minutes ago, Ezrektio said:

and how do I update the port firmware?

Paid license on FORScan

Search Forums

Version trial? Two mounth free?

45 minutes ago, Ezrektio said:

Version trial? Two mounth free?

No, for software/firmware updates you need a paid license

Check the forums first, you may not need it

Hi, I managed to activate what I wanted except the Ford performance writing on the steering wheel computer. I found it in the settings and activated it but nothing changes.
do you have an idea?

On 9/23/2023 at 4:07 AM, Ezrektio said:

Hi, I managed to activate what I wanted except the Ford performance writing on the steering wheel computer. I found it in the settings and activated it but nothing changes.
do you have an idea?

You have to select it in the myview screen

Yes but don’t see 😕

When you activated the horn to sound when the car was locked, in what way did you rewrite or activate it!?.. I would really like to know if something like this can be done with the mk 7.5 as well as I would like it with the ignition; let the daytime running lights light up and the positions on the back! Thanks!