Hi guys, new to the group.

Ive always been a Ford fan,Mondeos,Escorts, fiestas  ect,and have had 4Ghia's up to now,and worked on them all.

Just got my hands on a very nice mk2 focus Ghia,1.6 petrol-115BHP(pre facelift)only had 2 keepers from new,and every receipt, for the car since new, so,its not wanted for anything..........but ive got a couple of questions 1,The left had side multi function arm,indicators, full beam flash,and on board computer, for the settings ect,the mode button wont work?so i cant access the settings. Any ideas please 🙏 is the stalk a straight swap?

2.heater cluster set up,the 3 knobs ,

Can it be changed for the mk2.5 set up🤔? Any advice 🙏 

I

For the heater controls with the 3 dials these are the same on both mk2 and mk2.5. 
 

If you’re meaning to update from manual heater controls to automatic climate control which runs with buttons & LCD display etc this is possible in theory but involves serious work swapping out pretty much the whole dash and needing similar off another donor car to replace with. Definitely not plug and play

1 hour ago, troy45 said:

For the heater controls with the 3 dials these are the same on both mk2 and mk2.5. 
 

If you’re meaning to update from manual heater controls to automatic climate control which runs with buttons & LCD display etc this is possible in theory but involves serious work swapping out pretty much the whole dash and needing similar off another donor car to replace with. Definitely not plug and play

 I thought as much,just a idea i was playing with, my just upgrade the knobs then