fintious maximus Posted March 12, 2012 Share Posted March 12, 2012 Just bought oil and filter and notice that the filter is the cartridge type. Had a peer under the engine and it looks like it will come undone by hand or a rubber wrench type thing. Is this the case or do I need a proper fluted wrench? Quote Link to comment Share on other sites More sharing options...
stef123 Posted March 12, 2012 Share Posted March 12, 2012 the cartridge type are usually not too bad providing they have not been over tightened, any i have put on i can undo by hand. there are many tools available for removing stubborn ones though. Quote Link to comment Share on other sites More sharing options...
falcorob Posted March 12, 2012 Share Posted March 12, 2012 If you have a paper filter then you will need a suitable torx socket to drain the oil from the housing first and a suitable very large socket (36mm) to unscrew the plastic filter housing. Quote Link to comment Share on other sites More sharing options...
fintious maximus Posted March 12, 2012 Author Share Posted March 12, 2012 doesn't look like there's anywhere to fix a 36mm socket on the filter? Quote Link to comment Share on other sites More sharing options...
falcorob Posted March 12, 2012 Share Posted March 12, 2012 Check this you tube vid out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.