Could a mk1 rs body kit fit a standard mk1 focus zetec

yes, its been done before

Cheers m8 any other good mod ideas performance /styling wise all ideas are valued thank you

Sent from my iPhone 5

If your going for the RS body why not grab some bucket seats to complete the look? Save weight too:)

Will the body kit just replace my original bumpers or will they need modifying to fit thanks guys

Sent from my iPhone 5

Iv decided not to go for the rs body kit but dose any one know and good body kits that will fit my focus and I also installed a pioneer single din radio today in my focus

Sent from my iPhone 5

I'm going for a double din unit that santa is bringing me for Christmas, also installed footwell lights, clear indicator lenses and repeaters at the front, smoked lenses at the back, Blue led switches/dashboard on the inside ;)

What are they like the blue led dash conversion and the blue led switches m8

Sent from my iPhone 5

http://www.ebay.co.uk/sch/custom_modz_666/m.html?_nkw=&_armrs=1&_from=&_ipg=25&_trksid=p3984.m1543.l2654

This is the guy that does all the switches and speedo that I have in my car, hope it helps :-)

Cheers m8

Sent from my iPhone 5

That's focus just been serviced today oil fuel and air filters and new comma 5w30 oil

Just received a new three button flip style key today for the focus it the new style key thob

Just received a new three button flip style key today for the focus it the new style key thob

Do you have a photo of that? Where did you get it from?

. I got it off eBay with a new battery the circuit board and a virgin immobiliser chip all for £25

Nice, I'll have a look, cheers!

Any other mods any one knows about that I could do to my mk1 focus

Any other mods any one knows about that I could do to my mk1 focus

The sky is the limit - there are no end to modifications you can do to your car

Have u got any ideas mate

Is there any way of changing the rear reverse light to a clear lens in stead of a frosted lens thank you

Where did you get your key cut? I have the same one and places like timpsons say they can't do it!

I haven't got mine cut yet but i will let u kno as soon as I get it done

So I managed to get the key cut... And that works perfectly! Transferred the transponder across and it works the central locking...

However, when the key is in the II Position and I go to turnover the engine nothing happens, the immobiliser light flashes!

But if I stick the original key in (No transponder) it starts fine!

WHATS GOING ON?

I'm not sure mate it never happened to mine

Got it cut then? Don't you have a new transponder chip with yours?

Could u upload a pic of your new key and your old key and the tranponder if pos mate thank you