Anyone know the part number for the headlight bolts/ screws with washer?

Just go into ford and they'll hunt one down for you ? They'll only be pennies

Finis code F1464512 (screw size M6 x 18mm).

About £1.26 for 4.

Just be careful because that screw looks the same as the one at the other end which goes into the bumper but has a different thread. The one that goes into the wing has a finer thread. I almost got them mixed up when I changed the bulbs but luckily didn't strip any threads.

Just be careful because that screw looks the same as the one at the other end which goes into the bumper but has a different thread. The one that goes into the wing has a finer thread. I almost got them mixed up when I changed the bulbs but luckily didn't strip any threads.

Never noticed that, mine are probably mixed up!

Finis code F1464512 (screw size M6 x 18mm).

About £1.26 for 4.

thanks :D

On Microcat the screws at both end are the same Finis code.

Never noticed that, mine are probably mixed up!

I doubt it, the wrong screw wouldn't go into the wing, it felt very wrong which is when I noticed the different thread on the others. I learned something though, don't assume screws are the same and look at the thread :)

I doubt it, the wrong screw wouldn't go into the wing, it felt very wrong which is when I noticed the different thread on the others. I learned something though, don't assume screws are the same and look at the thread :)

yeah very good point, I must admit ive never felt the screw wouldnt go in, maybe just been luck then for me, or the guys in the factory used the wrong screw for yours?

I'm sure stoney knows best ;)

Nice one Willy, just been quoted £1.80 per bolt !!!

I'm gonna go steal one off a demo fiesta in the showroom.

Nice one Willy, just been quoted £1.80 per bolt !!!

I'm gonna go steal one off a demo fiesta in the showroom.

Don't forget to thank Clive too ;)

Don't forget to thank Clive too ;)

No thanks needed.

All part of the service ;)