I'm tempted by these mist washers, seen them on a Golf which had them as standard and they were great. Are they adjustable like the standard ones or does the mist spray over the whole windscreen?

And how do the heated ones work, are there some cables to wire up in the engine bay, and are they set up to come on with the heated screen or with a separate button?

They're not adjustable. It covers the whole screen. Heated ones work with the heated windscreen switch I think. The wiring needs to be present & they need enabling

I have these on the TXS - they are very effective & the heated function works very well in the winter

I have the most washers and they are far better than standard

Sent from my iPhone using Ford OC mobile app

I have the most washers and they are far better than standard

Sent from my iPhone using Ford OC mobile app

They're great

Sent from my HTC One_M8 using Tapatalk

I have the Quickclear windscreen, so is it possible to put heated washers onto the car?

I have the Quickclear windscreen, so is it possible to put heated washers onto the car?

Depends if the wiring is present/able to be added. It'll then need to be enabled assuming the relevant fuses & relays are present, I believe

Sent from my HTC One_M8 using Tapatalk

I looked into it and it's not an easy job without cutting wires etc. The fiesta doesn't come with heated washers so there's no bits on the loom. Basically you take the loom from the focus.

Sounds complicated and expensive.

You'd think the Titanium would have had them as standard, considering the cost of it. ^_^

To be honest I can't remember ever needing to use the washers and finding they were frozen. If the washers are frozen then your windscreen is probably covered in ice too, which means you'll be using the heated screen and the wipers. Then by the time you really need to clean the screen the washers will have been warmed up by the engine.

Are the washers easy to swap over ?

Are the washers easy to swap over ?

Very

Sent from my HTC One_M8 using Tapatalk

Pop them off with a tool from above the bonnet or from underneath (if that makes sense)

As said really easy, just pull the insulation back under the bonnet and push them through, disconnect the pipes and then reverse order to fit the new ones.

I have bought some so will fit them when they arrive

I had mist jets but sprayed over roof used a dab of super glue to make it spray down but glue never set at all........

But for the wiring of the heated ones you guys are making it so complex why not just add it onto Ur heated wingmirrors ?

Would work when u turn on heated windscreen

^ I think the heated mirrors come on with the rear screen.

^ I think the heated mirrors come on with the rear screen.

They do.

A don't know I just press the max button and they come on

But would this circuit be good enough for the mist jets

Just wire it into the heated front screen circuit ;)

Awww flek aye haha